Wyoming has no statute found that makes a cemetery accept a marker bought elsewhere. State law lets each city prescribe its own rules for monuments and has cemetery districts file their rules with the county clerk, so the answer sits with the cemetery office. Cheyenne’s code names bronze as an accepted material in the Beth El section, and the city prints a largest single marker of 36 by 16 inches on a 44 by 24 inch foundation. Evanston’s rules accept granite, marble, bronze or other noncorrosive metal. Casper charges a setting permit of $50 to $100 for a new marker and none for a flush one. No Wyoming cemetery we read bars bronze. We cast the bronze plaque and show its price in US dollars with shipping included; the granite base and the setting are arranged through the cemetery office or a local monument dealer.

Design a Wyoming bronze marker online
Enter the size your cemetery prints, add the inscription and symbol, and see the US dollar price with shipping included.
Explore: bronze grave markers · bronze plaques for headstones · bronze plaques across the USA
Wyoming law: each city or district writes its own monument rules
No Wyoming statute was found that makes a cemetery accept a marker bought elsewhere or that limits a setting fee. Wyoming Statutes Title 35, Chapter 8 leaves the subject to the operator. Under W.S. 35-8-201 each city or town may “prescribe rules for enclosing and adorning cemetery lots, and the erection of monuments and tombstones thereon.” Under W.S. 35-8-303 the trustees of a special cemetery district “shall have power to make such rules and regulations as are necessary for the proper operation of the district and shall file them with the county clerk for each county in which the district is located.” The chapter names no regulator or complaint body for grave markers.
Cheyenne: bronze is named for Beth El, and the city prints maximum sizes
The City of Cheyenne runs Lakeview, Beth El and I.O.O.F. cemeteries from one office on Seymour Avenue (307-637-6402). Cheyenne Municipal Code 12.20.130 (code version June 25, 2026) applies to the Beth El section only: “Every monument or marker hereafter erected or installed in the Beth El section of the cemetery shall be of granite, bronze, metal or marble of a quality approved by the director of public works.” It adds “Every marker shall be of one piece and no less than four inches thick, twenty (20) inches long”, set so that its top “shall be level with the surface of the ground.” A bronze plaque on a granite base is two pieces, and the code does not say how bronze meets the one piece rule, so ask the office before ordering. No other section of the chapter sets a material or size for Lakeview or I.O.O.F.
The city’s General Cemetery FAQ (no date printed) covers the whole complex. For single grave markers the “Maximum size of foundation is 44 inches by 24 inches for a maximum sized monument of 36 inches by 16 inches”; for double markers, 92 by 24 inches for a monument of 86 by 16 inches. “Marble, sandstone, and other soft stones are prohibited”, which is stricter than the code. “The Cemetery Complex will not receive, store or install any type of monument or markers”, and “Monument installers must carry liability insurance”. The only fee printed is $250 to place a VA military marker; the code sets grave and burial fees but none for a private marker.
Olivet Cemetery
The Catholic Olivet Cemetery is maintained by the city: “All headstones and placements must be approved by the city and meet their guidelines for care and maintenance.” Its page prints no marker sizes or fees.
Casper and Laramie
Casper’s city owned Highland Cemetery (307-235-8317) states on its fees page, marked “updated 08/03/2022” and read in an archived copy from August 2025: “For any new markers (headstones or monuments) placed at Highland Cemetery, a setting permit of $50 to $100 must be paid prior to setting. There is no setting permit due for flush markers (markers level with the grass).” Under Casper Municipal Code 12.40.100 a monument goes in “under the supervision of the city manager” and under rules filed at the cemetery office, which are not online. Materials and sizes are not published.
Laramie’s Greenhill Cemetery rules and fee schedule (no date printed) require “a permanent material” and say in bold: “All monuments and markers must be installed with a solid foundation flush with the ground, extending 4″ around the monument, and on the lot line.” Setting is “under the direct supervision of the cemetery personnel”. Bronze is neither named nor barred, no setting fee is listed, and the schedule notes “*Flat Marker areas are not being sold at this time.”
Gillette, Sheridan and Cody
Gillette’s Mount Pisgah belongs to the Campbell County Cemetery District, whose manual (“Revised: 9/17/21”) requires a permit from the district office and a concrete foundation that “will extend four inches beyond the ends of the marker, monument, or memorial, in all directions”, no wider than four feet for a single. Up to three markers are allowed per space, including a flat grass marker. Monument companies’ work is inspected. No material is prescribed and no permit fee is printed.
The Sheridan Municipal Cemetery policies (approved March 2020) allow markers “made of stone, concrete, or metal”, no more than 18 inches wide and 54 inches long on a single grave, on a foundation 24 inches wide and four inches thick that is flush with the ground and extends three inches past the marker. A city permit is required.
In Cody, the Riverside Cemetery District rules (“Revised February 1, 2016”) require a permit and “a permanent type material, excluding wood and wood products”, set in concrete at least 4 inches thick with “a concrete border of 6 inches”. Section 14 at Riverside and Section 22 at Riverside-Graham are flush to the ground.
Evanston, Douglas and Rock Springs
The Evanston City Cemetery rules (no date printed) name bronze: “All monuments, headstones and markers shall be of granite, marble, bronze or other noncorrosive metal.” A headstone permit comes first, every headstone needs “a four-inch concrete mow strip on all sides”, and none may be placed “from November 1 through May 1 of each year.” The New Public and Red Mountain sections take only flat, flush headstones.
The Douglas rules (“Revised and Adopted September 11, 2023”) say “Footstones and secondary flat markers will be of one piece of approved stone or bronze and will not exceed two feet (2′) in length” or one foot in width, installed flush. Rock Springs publishes interment fees but nothing on markers; Riverton’s pages could not be opened. Ask those offices.
Wyoming cemeteries at a glance
| Cemetery | What it accepts | Setting or foundation fee (year) |
|---|---|---|
| Beth El section, Cheyenne | Granite, bronze, metal or marble per the code; marker one piece, at least 4″ thick and 20″ long, level with the ground | None for a private marker (code version June 25, 2026) |
| Cheyenne city cemeteries generally | Single marker to 36 by 16 inches on a 44 by 24 inch foundation; no marble or soft stone; insured installer | $250 for a VA marker only (FAQ, no date printed) |
| Highland, Casper | Rules at the cemetery office; not online | Setting permit $50 to $100; none for a flush marker (updated 08/03/2022) |
| Greenhill, Laramie | Permanent material; foundation flush with the ground, 4″ around | None on the fee schedule (no date printed) |
| Mount Pisgah, Gillette | Concrete foundation four inches beyond the marker; permit from the district | None printed (manual revised 9/17/21) |
| Sheridan Municipal Cemetery | Stone, concrete or metal; to 18 by 54 inches on a single grave | None printed (2020 policies) |
| Evanston City Cemetery | Granite, marble, bronze or other noncorrosive metal; four inch mow strip | Permit required; no fee printed (no date printed) |
| Cheyenne National Cemetery | Government marker set by the cemetery | No cost for an eligible veteran |
Cheyenne National Cemetery, Oregon Trail and veterans
At Cheyenne National Cemetery the cemetery orders and sets the government headstone or marker. A private bronze marker is not the route there. The Oregon Trail State Veterans Cemetery in Evansville is run by the state with VA grant funding; ask its office about markers. In a private or city cemetery that allows bronze, the family can order its own marker and request a VA medallion for it. See veteran bronze grave markers.
What we supply for a Wyoming grave
Cheyenne’s printed limit for a single grave is a 36 by 16 inch marker, and Beth El asks for at least 20 inches in length. Our 24 by 12 inch plaque, cast to order, is $1,697.45, shipping included; the 20 by 10 inch plaque is $1,407.68 and the 20 by 12 inch plaque is $1,550.78. Douglas limits a flat bronze footstone to 2 feet by 1 foot. Ask the Cheyenne office how its one piece rule applies to bronze on granite. Companions are quoted.
We supply the bronze. Every plaque is cast in solid LG2 statuary bronze (85 percent copper, 5 percent tin, 5 percent zinc, 5 percent lead) with raised polished lettering on a textured background, a hand applied color and a clear protective coating. Cemetery markers are cast with lugs and fitted with 3/8 inch brass all thread studs, nuts and washers for bolting to a granite or concrete base; columbarium plates use 1/4 inch fittings. We publish the alloy openly and can supply a certificate of authenticity stating it, so a cemetery that has its own alloy rule can check our figures against it before you order; a few cemeteries specify a higher copper or lower lead content than LG2, and where a page knows of one it says so. The granite or concrete base and the setting are arranged through the cemetery office or a local monument dealer; we do not pour bases or install.
The price of the bronze from us, shipped anywhere in Wyoming
To keep the two kinds of cost apart, this table shows only our price for the bronze, taken from the design tool on this site on 18 November 2026 for a standard rectangle with the default border and background. Prices are in US dollars and include shipping to Wyoming.
| Size, inches | Typical use | Our price, shipping included |
|---|---|---|
| 6 x 4 in | Small niche or urn plate, pet memorial | $382.98 |
| 8 1/2 x 5 1/2 in | The VA niche marker size, private columbarium plates | $540.98 |
| 10 x 10 in | Niche plate or vase block size used by several cemeteries | $796.86 |
| 12 x 8 in | Small cremation marker, bench or wall plaque | $796.86 |
| 16 x 8 in | Infant and cremation markers (the minimum at many parks) | $978.39 |
| 18 x 10 in | Infant and cremation markers where 18 x 10 is the rule | $1,264.58 |
| 20 x 10 in | Cremation and urn garden markers, the 20 x 10 envelope | $1,407.68 |
| 20 x 12 in | Single flat marker inside a 20 x 12 envelope | $1,550.78 |
| 24 x 12 in | The standard single adult flat marker, cast to order at the 22 1/16 x 12 price | $1,697.45 |
Setting fees, permits, foundations and endowment care charges quoted on this page go to the cemetery, not to us, and sit on top of the plaque price. For any size not in the table, the design tool prices it the moment you type the width and height, and that price also includes shipping.
How to order
- Ask the cemetery office for its written marker rules: the size it allows for your space, the base it requires, who may set the marker and the fee. Most offices email the sheet the same day, and several states require the cemetery to keep it in print for you.
- Open the free design tool, pick the shape and type the width and height in inches. The price in US dollars updates as you go, shipping to any address in the continental United States included. That is the delivered price: we take care of any import duty and customs clearance ourselves, so there is nothing extra to pay when the plaque arrives.
- Add the names, dates and wording, choose a border and background, and add an emblem, motif or photo if you want one. Choose lugs with studs if the plaque will be bolted to a granite or concrete base, or a flat back for adhesive mounting on a wall or niche.
- Press Proceed to Purchase to order, or save the design and come back to it from My Account. We send a written proof you can forward to the cemetery for approval, and nothing is cast until you approve it. Need the full 24 by 12 inch marker size? Tell us when you order; it is cast to order at the same price as the 22 1/16 by 12 inch size in the tool.
Allow six to eight weeks from payment to delivery. Casting, hand finishing and shipping from our foundry take most of that time, and we send a free written proof before anything is cast. If your cemetery sets markers only in certain months, order early enough for its next installation window.
Frequently asked questions
Does Wyoming law make a cemetery accept a marker I buy online?
No statute saying so was found. W.S. 35-8-201 lets each city prescribe its own rules for monuments, so the cemetery’s rules decide.
Is bronze allowed in Cheyenne’s city cemeteries?
The code names granite, bronze, metal or marble for the Beth El section, with markers of one piece, at least four inches thick and twenty inches long. The citywide FAQ limits a single marker to 36 by 16 inches and does not bar bronze.
What does Casper charge to set a marker at Highland Cemetery?
The city’s fees page, marked updated 08/03/2022, gives a setting permit of $50 to $100 for a new marker and none for a flush marker. Ask the office for the current figure.
Which Wyoming cemetery rules name bronze?
Cheyenne’s code for the Beth El section, Evanston’s city cemetery rules, and the Douglas rules for footstones and secondary flat markers.
Can a private bronze marker go in Cheyenne National Cemetery?
No. In VA national cemeteries the cemetery orders and sets a government marker.
Get the cemetery sheet, then design the bronze
Set the size your Wyoming cemetery prints, add the names, dates and emblem, and see the US dollar price for solid cast bronze. Free proof for the office, shipping included.
Explore: bronze plaque sizes · bronze plaques in Colorado · contact us


