Washington, D.C. has no statute found that makes a cemetery accept a marker bought elsewhere or that caps a setting fee; the D.C. Code chapter on cemeteries dates from 1901 and leaves each cemetery to write its own rules. Historic Congressional Cemetery prints the fullest rulebook: bronze is an allowed material, the cemetery makes no markers itself, every design needs Board approval, and the permission fee is currently $250.00. Rock Creek Cemetery’s 2026 price list charges $.95 per square inch of surface for installation and care, and its own staff install markers. Mount Olivet shows flush bronze memorials but prints no sizes or fees. Below is what each cemetery prints, with the year of every fee. We cast the bronze plaque and show its price in US dollars with shipping included; the granite base and the setting are arranged through the cemetery office or a local monument dealer.

Design a Washington, D.C. bronze marker online
Enter the size your cemetery prints, add the inscription and symbol, and see the US dollar price with shipping included.
Explore: bronze grave markers · bronze plaques for headstones · bronze plaques across the USA
Washington, D.C. law: a 1901 cemetery chapter, not a marker statute
D.C. Code Title 43, Chapter 1 comes largely from the Act of March 3, 1901. It covers incorporation, platting, burial registers and grave sizes. Section 43-110 gives each cemetery corporation power to “prescribe rules and regulations for its government” and the management of its property. No section was found that makes a cemetery accept a marker bought elsewhere, caps a setting or foundation fee, or requires a cemetery to publish its rules, and no cemetery board or complaint office for cemeteries was identified. The cemetery’s own rulebook decides.
Capitol Hill: Historic Congressional Cemetery
Congressional publishes the fullest rules in the District. Its burial options page says “Congressional Cemetery does not create markers” and “All work must be approved by the cemetery before installation, regardless of maker.” The Rules and Regulations (no date printed) say “Memorials must be natural stone, such as marble, granite, slate, or sandstone, or non-ferrous metals such as bronze.” No size table is printed: “The monument may not exceed the boundaries of the purchased burial plot(s)”, and the Range and Site numbers must appear on it, “For example: R70 / S200.”
The Board of Directors approves design, materials and placement from a scale drawing with the proposed text. “Concrete foundations are mandatory and installed at the owner’s expense”; they are “set 1″ below grade” and “should extend 6″ past the perimeter of the base”. The contractor needs a work approval form and a certificate of insurance and gives two days’ notice. The permission fee “is currently $250.00”, and the price list marked Jan. 2026 prints “Monument Placement $250.00 – $500.00” as minimums and “Installation/Removal/Resetting by HCC +$250.00”. The cemetery’s vendor sheet (updated Nov. 2025) recommends waiting “a full calendar year” after a burial before installing.
Two rules bear directly on a plaque from us. “Fasteners and hardware shall be bronze or stainless steel”, and our standard studs are 3/8 inch brass, which does not match that wording. The rules also prohibit epoxy, silicone, caulk and sealants, so a plaque cannot be glued down. Do not order for a Congressional grave until the cemetery has approved the fixing in writing and we have confirmed we can supply it; we do not offer our standard brass fitting there.
Rock Creek Cemetery
St. Paul’s Rock Creek Cemetery prints fees but not its rulebook. The general price list (“Prices effective as of 02/17/2026”) lists “Installation/Care Fees, $.95 Per Square Inch of Surface” and “Foundation/Care Fees, $1.90 Per Square inch of Base”. On a 24 by 12 inch marker the surface fee alone is about $273.60; the list does not say whether the base fee is added for a flat marker. The cemetery’s Memorials and Markers page prints a different installation figure, “$1.90 per square inch of surface”, so confirm the rate.
That page says “Markers are generally made of bronze, granite or marble”, that management “must approve all memorial designs in advance”, that restrictions differ by section, and that “Cemetery personnel install markers”. Fees are “payable to the Cemetery on all memorials installed in Rock Creek.” It prints no marker size and does not say whether a marker bought elsewhere is accepted; the price list sends readers to Rules and Regulations that are not online. Ask the office both questions before ordering.
Mount Olivet, Glenwood and Oak Hill
Mount Olivet Cemetery on Bladensburg Road NE, run by the Catholic Cemeteries of the Archdiocese of Washington, says “Memorials for below ground burials can be either traditional upright monuments or flush bronze memorials.” Its memorials page shows flush bronze individual, companion and double interment memorials with a vase and adds “Granite bases are sold separately.” It prints no sizes and nothing about memorials bought elsewhere or who sets them, and the service charges effective January 1, 2026 list interment fees only, with no memorial or foundation fee. The same staff administer St. Mary’s Cemetery. Ask the office.
Glenwood Cemetery on Lincoln Road NE prints only “For current pricing, please contact the office.” Oak Hill Cemetery in Georgetown describes inscribed granite and slate covers and memorial stones approved by the cemetery; it does not mention bronze and prints no marker rules or fees, so do not assume a bronze plaque is accepted there.
Washington, D.C. cemeteries at a glance
| Cemetery | What it accepts | Setting or foundation fee (year) |
|---|---|---|
| Historic Congressional Cemetery | Stone or bronze from any maker, with Board approval; hardware bronze or stainless steel | Permission fee “currently $250.00” (no date printed); placement $250.00 to $500.00 minimums (2026) |
| Rock Creek Cemetery | Bronze, granite or marble markers; cemetery staff install; outside purchase not addressed | $.95 per square inch of surface and $1.90 per square inch of base (2026) |
| Mount Olivet Cemetery | Flush bronze memorials on granite bases; no sizes printed | Not on the 2026 service charges |
| Glenwood Cemetery | Nothing printed online | Contact the office |
| Oak Hill Cemetery | Granite and slate described; bronze not mentioned | Not published |
| VA national cemeteries | None in the District; the VA lists only government lots at Congressional | Government headstones and markers are furnished at no charge |
Veterans: the government lots and the VA medallion
The VA’s list for the District shows no national cemetery of its own, only the Congressional Cemetery Government Lots, and no state veterans cemetery. Where a national or state veterans cemetery is used, the cemetery officials order the government headstone or marker, and a private bronze marker is not the route. Arlington National Cemetery is in Virginia and is run by the Army. In a private cemetery that allows bronze, the family can order its own marker and request a VA medallion for it, with placement at private expense. See veteran bronze grave markers.
What we supply for a Washington, D.C. grave
No Washington, D.C. cemetery prints a bronze marker size, so the figure the office gives you decides. The common single size, 24 by 12 inches, is $1,697.45 from us, cast to order, shipping included. A 24 by 14 inch plaque is $1,840.54 and a 16 by 8 inch cremation plaque is $978.39. Companions are quoted.
We supply the bronze. Every plaque is cast in solid LG2 statuary bronze (85 percent copper, 5 percent tin, 5 percent zinc, 5 percent lead) with raised polished lettering on a textured background, a hand applied color and a clear protective coating. Cemetery markers are cast with lugs and fitted with 3/8 inch brass all thread studs, nuts and washers for bolting to a granite or concrete base; columbarium plates use 1/4 inch fittings. We publish the alloy openly and can supply a certificate of authenticity stating it, so a cemetery that has its own alloy rule can check our figures against it before you order; a few cemeteries specify a higher copper or lower lead content than LG2, and where a page knows of one it says so. The granite or concrete base and the setting are arranged through the cemetery office or a local monument dealer; we do not pour bases or install.
The price of the bronze from us, shipped anywhere in Washington, D.C.
To keep the two kinds of cost apart, this table shows only our price for the bronze, taken from the design tool on this site on 18 November 2026 for a standard rectangle with the default border and background. Prices are in US dollars and include shipping to Washington, D.C..
| Size, inches | Typical use | Our price, shipping included |
|---|---|---|
| 6 x 4 in | Small niche or urn plate, pet memorial | $382.98 |
| 8 1/2 x 5 1/2 in | The VA niche marker size, private columbarium plates | $540.98 |
| 10 x 10 in | Niche plate or vase block size used by several cemeteries | $796.86 |
| 12 x 8 in | Small cremation marker, bench or wall plaque | $796.86 |
| 16 x 8 in | Infant and cremation markers (the minimum at many parks) | $978.39 |
| 18 x 10 in | Infant and cremation markers where 18 x 10 is the rule | $1,264.58 |
| 20 x 10 in | Cremation and urn garden markers, the 20 x 10 envelope | $1,407.68 |
| 20 x 12 in | Single flat marker inside a 20 x 12 envelope | $1,550.78 |
| 24 x 12 in | The standard single adult flat marker, cast to order at the 22 1/16 x 12 price | $1,697.45 |
Setting fees, permits, foundations and endowment care charges quoted on this page go to the cemetery, not to us, and sit on top of the plaque price. For any size not in the table, the design tool prices it the moment you type the width and height, and that price also includes shipping.
How to order
- Ask the cemetery office for its written marker rules: the size it allows for your space, the base it requires, who may set the marker and the fee. Most offices email the sheet the same day, and several states require the cemetery to keep it in print for you.
- Open the free design tool, pick the shape and type the width and height in inches. The price in US dollars updates as you go, shipping to any address in the continental United States included. That is the delivered price: we take care of any import duty and customs clearance ourselves, so there is nothing extra to pay when the plaque arrives.
- Add the names, dates and wording, choose a border and background, and add an emblem, motif or photo if you want one. Choose lugs with studs if the plaque will be bolted to a granite or concrete base, or a flat back for adhesive mounting on a wall or niche.
- Press Proceed to Purchase to order, or save the design and come back to it from My Account. We send a written proof you can forward to the cemetery for approval, and nothing is cast until you approve it. Need the full 24 by 12 inch marker size? Tell us when you order; it is cast to order at the same price as the 22 1/16 by 12 inch size in the tool.
Allow six to eight weeks from payment to delivery. Casting, hand finishing and shipping from our foundry take most of that time, and we send a free written proof before anything is cast. If your cemetery sets markers only in certain months, order early enough for its next installation window.
Frequently asked questions
Does Washington, D.C. law make a cemetery accept a marker I buy online?
No statute saying so was found. D.C. Code section 43-110 lets each cemetery corporation prescribe its own rules, so ask the office for them in writing.
Does Congressional Cemetery allow bronze markers from an outside maker?
Its rules allow non-ferrous metals such as bronze and it makes no markers itself, but the Board must approve every design and hardware must be bronze or stainless steel. The permission fee is currently $250.00.
What does Rock Creek Cemetery charge to install a marker?
Its price list effective 02/17/2026 prints $.95 per square inch of surface for installation and care and $1.90 per square inch of base for foundation and care. Its web page prints $1.90 for both, so confirm.
Can I place a bronze marker at Mount Olivet Cemetery?
Mount Olivet offers flush bronze memorials on granite bases, but it prints no sizes, fees or policy on memorials bought elsewhere. Ask the office before ordering.
Is there a VA national cemetery in Washington, D.C.?
The VA lists only government lots at Congressional Cemetery. Arlington National Cemetery is in Virginia and uses government headstones.
Get the cemetery sheet, then design the bronze
Set the size your Washington, D.C. cemetery prints, add the names, dates and emblem, and see the US dollar price for solid cast bronze. Free proof for the office, shipping included.
Design a Washington, D.C. Marker →
Explore: bronze plaque sizes · bronze plaques in Virginia · contact us


