South Dakota has no statute found that makes a cemetery accept a marker bought elsewhere; state law instead lets a cemetery corporation write its own rules for monuments. So in Sioux Falls and Rapid City the cemetery’s rulebook decides. Woodlawn in Sioux Falls requires granite or quartzite markers and allows bronze only as a plaque attached to one. St. Michael charges a permit fee of $110 per linear foot of foundation, Hills of Rest sells bronze on granite and publishes no rules, and Rapid City’s municipal cemeteries list a $100.00 monument setting fee for 2026. Below is what each major operator prints, with the year of every fee. We cast the bronze plaque and show its price in US dollars with shipping included; the granite base and the setting are arranged through the cemetery office or a local monument dealer.

Cast bronze grave marker on a granite base in a lawn cemetery, the kind of marker we ship to South Dakota

Design a South Dakota bronze marker online

Enter the size your cemetery prints, add the inscription and symbol, and see the US dollar price with shipping included.

Design My Marker →

Explore: bronze grave markers · bronze plaques for headstones · bronze plaques across the USA

South Dakota law: cemeteries write their own monument rules

No South Dakota statute was found that makes a cemetery accept a marker bought elsewhere, caps setting fees or makes a cemetery publish its rules, and no state body was found that handles marker disputes. The cemetery corporation chapter points the other way: SDCL 47-29-20 gives a cemetery corporation power “to prescribe in its bylaws rules for the sale, inclosure, or ornamentation of lots and for erecting monuments or gravestones thereon”. Cities regulate their own cemeteries under SDCL 9-32-13. So the cemetery’s rulebook decides, and it is worth asking for it in writing before ordering.

Sioux Falls: Woodlawn, St. Michael and Hills of Rest

Woodlawn Cemetery (Monument and Marker Regulations, undated, posted January 2025) does not provide for a bronze grave marker on its own: “All monuments, markers, and cornerstones shall be constructed of granite or quartzite. Plaques attached to a monument or marker must be constructed of bronze.” We therefore do not offer a free standing bronze marker for Woodlawn. A bronze plaque can only go on a granite or quartzite marker bought from a monument dealer, and the Association must approve a scale plan showing “the material, sizes, finish, lettering and engraving in detail”; it may “reject any monument or marker for any reason.”

Sizes depend on the addition. In Maple Leaf, “Markers in this Addition shall be a single (2′ x 1′) or a double marker no larger than 4′ in length. If a bronze plaque is placed on these beveled markers, the marker can be 4″ wider in length and width.” The Sixth Addition takes “Only 2′ x 1′ markers”, Eastlawn a “single gray marker 2′ x 1′”, the baby section markers of “1′ x 6″” or “1’4″ x 8″”, and Westlawn “B”, Summit, Sycamore and Magnolia markers “20” to 24″ in length”. Flat markers go at the foot of the grave, “No markers may be set before burial”, and “The Association is responsible for the construction of the concrete foundation.” Its 2026 price sheet prints no foundation or setting fee.

St. Michael Catholic Cemetery prints a “Permit fee for setting a foundation $110 per linear foot” (no year printed), charged “for the right of the Monument Company to install foundations and memorial markers” and paid with the permit forms “at least 48 hours prior to the installation of any foundation.” On a foundation two feet long that is about $220, assuming the fee is measured on the foundation’s length alone. “Monuments will be set by reputable monument companies, with the approval of the Cemetery management.” The page gives no materials or sizes and does not mention bronze, so ask before ordering.

Hills of Rest sells “bronze on granite markers” itself and says the income supports the cemetery. It publishes no sizes, base rule, policy on markers bought elsewhere or setting fee. Ask the office. No site was found for Mount Pleasant Cemetery.

Rapid City: Mountain View and Mount Calvary

The City of Rapid City runs Mountain View and Mount Calvary Cemeteries. Its 2026 rates, with sales tax included, list “Monument Setting Fees $100.00”. The city’s Cemetery Regulations and Municipal Code Chapter 13.32 are linked from that page but could not be opened when this page was researched, so the materials allowed, sizes, base rule and who may set a marker are not stated here. Ask the cemetery office for the regulations before ordering. No rules were found online for Pine Lawn Memorial Park.

South Dakota cemeteries at a glance

CemeteryWhat it acceptsSetting or foundation fee (year)
Woodlawn, Sioux FallsGranite or quartzite markers; bronze only as an attached plaque; 2′ x 1′ in several additionsNot on the 2026 price sheet
St. Michael, Sioux FallsSet by monument companies with approval; materials not printed$110 per linear foot foundation permit (no year printed)
Hills of Rest, Sioux FallsBronze on granite sold by the cemetery; rules not onlineNot published
Mountain View and Mount Calvary, Rapid CityRegulations could not be opened$100.00 monument setting (2026)
Black Hills National CemeteryGovernment marker set by the cemeteryNo cost for an eligible veteran

Black Hills National Cemetery, the state veterans cemetery and veterans

At Black Hills National Cemetery in Sturgis, and at the South Dakota State Veterans Cemetery, the cemetery orders and sets the government headstone or marker. A private bronze marker is not the route there. Fort Meade and Hot Springs National Cemeteries are closed to new interments. For a government marker placed in a private cemetery, the South Dakota Department of Veterans Affairs says “The state will pay $200 towards the cost of setting a government headstone or marker” for a qualifying resident veteran, applied for through a county or tribal veterans service officer within one year of setting. In a private cemetery that allows bronze, the family can order its own marker and request a VA medallion for it, with placement at private expense. See veteran bronze grave markers.

What we supply for a South Dakota grave

The size printed most often in Sioux Falls is 2′ x 1′. We cast a 24 by 12 inch plaque to order for $1,697.45, shipping included; at Woodlawn it could only go on a granite marker, which in Maple Leaf may then be 4 inches wider each way. A 20 by 10 inch plaque is $1,407.68 and a 16 by 8 inch plaque is $978.39. Companions are quoted.

We supply the bronze. Every plaque is cast in solid LG2 statuary bronze (85 percent copper, 5 percent tin, 5 percent zinc, 5 percent lead) with raised polished lettering on a textured background, a hand applied color and a clear protective coating. Cemetery markers are cast with lugs and fitted with 3/8 inch brass all thread studs, nuts and washers for bolting to a granite or concrete base; columbarium plates use 1/4 inch fittings. We publish the alloy openly and can supply a certificate of authenticity stating it, so a cemetery that has its own alloy rule can check our figures against it before you order; a few cemeteries specify a higher copper or lower lead content than LG2, and where a page knows of one it says so. The granite or concrete base and the setting are arranged through the cemetery office or a local monument dealer; we do not pour bases or install.

The price of the bronze from us, shipped anywhere in South Dakota

To keep the two kinds of cost apart, this table shows only our price for the bronze, taken from the design tool on this site on 18 November 2026 for a standard rectangle with the default border and background. Prices are in US dollars and include shipping to South Dakota.

Size, inchesTypical useOur price, shipping included
6 x 4 inSmall niche or urn plate, pet memorial$382.98
8 1/2 x 5 1/2 inThe VA niche marker size, private columbarium plates$540.98
10 x 10 inNiche plate or vase block size used by several cemeteries$796.86
12 x 8 inSmall cremation marker, bench or wall plaque$796.86
16 x 8 inInfant and cremation markers (the minimum at many parks)$978.39
18 x 10 inInfant and cremation markers where 18 x 10 is the rule$1,264.58
20 x 10 inCremation and urn garden markers, the 20 x 10 envelope$1,407.68
20 x 12 inSingle flat marker inside a 20 x 12 envelope$1,550.78
24 x 12 inThe standard single adult flat marker, cast to order at the 22 1/16 x 12 price$1,697.45

Setting fees, permits, foundations and endowment care charges quoted on this page go to the cemetery, not to us, and sit on top of the plaque price. For any size not in the table, the design tool prices it the moment you type the width and height, and that price also includes shipping.

How to order

  1. Ask the cemetery office for its written marker rules: the size it allows for your space, the base it requires, who may set the marker and the fee. Most offices email the sheet the same day, and several states require the cemetery to keep it in print for you.
  2. Open the free design tool, pick the shape and type the width and height in inches. The price in US dollars updates as you go, shipping to any address in the continental United States included. That is the delivered price: we take care of any import duty and customs clearance ourselves, so there is nothing extra to pay when the plaque arrives.
  3. Add the names, dates and wording, choose a border and background, and add an emblem, motif or photo if you want one. Choose lugs with studs if the plaque will be bolted to a granite or concrete base, or a flat back for adhesive mounting on a wall or niche.
  4. Press Proceed to Purchase to order, or save the design and come back to it from My Account. We send a written proof you can forward to the cemetery for approval, and nothing is cast until you approve it. Need the full 24 by 12 inch marker size? Tell us when you order; it is cast to order at the same price as the 22 1/16 by 12 inch size in the tool.

Allow six to eight weeks from payment to delivery. Casting, hand finishing and shipping from our foundry take most of that time, and we send a free written proof before anything is cast. If your cemetery sets markers only in certain months, order early enough for its next installation window.

Frequently asked questions

Does South Dakota law make a cemetery accept a marker I buy online?

No statute saying so was found. SDCL 47-29-20 lets a cemetery corporation prescribe its own rules for erecting monuments, so ask the office for them in writing.

Can I place a bronze grave marker at Woodlawn Cemetery in Sioux Falls?

Not on its own. Woodlawn requires markers of granite or quartzite and allows bronze only as a plaque attached to a monument or marker, with the plan approved by the Association.

What does St. Michael Catholic Cemetery charge for setting a marker?

Its prices page lists a permit fee of $110 per linear foot for setting a foundation, paid by the monument company at least 48 hours ahead. No year is printed.

What is the monument setting fee at Rapid City’s Mountain View Cemetery?

The city’s 2026 rates list monument setting fees of $100.00, sales tax included. Its regulations could not be opened, so ask the office for the size and material rules.

Can a private bronze marker go in Black Hills National Cemetery?

No. In VA national cemeteries the cemetery orders and sets a government marker.

Get the cemetery sheet, then design the bronze

Set the size your South Dakota cemetery prints, add the names, dates and emblem, and see the US dollar price for solid cast bronze. Free proof for the office, shipping included.

Design a South Dakota Marker →

Explore: bronze plaque sizes · bronze plaques in Minnesota · contact us