Oregon has no statute found that makes a cemetery accept a marker bought elsewhere or that caps setting fees. ORS 97.710 lets each cemetery authority regulate the class and kind of markers, and requires its rules to be printed and open to inspection at its office. In Portland those rules lean toward granite: River View says bronze is not accepted, Metro’s fourteen pioneer cemeteries write their sizes for granite and put bronze through additional approval, and the Catholic cemeteries print stone sizes only. Oregon City’s Mountain View prints fees for markers set by an outside vendor, and the Eugene Masonic Cemetery accepts natural stone or bronze. Below is what each operator prints, with the year of every fee. We cast the bronze plaque and show its price in US dollars with shipping included; the granite base and the setting are arranged through the cemetery office or a local monument dealer.

Design an Oregon bronze marker online
Enter the size your cemetery prints, add the inscription and symbol, and see the US dollar price with shipping included.
Explore: bronze grave markers · bronze plaques for headstones · bronze plaques across the USA
Oregon law: the cemetery writes the marker rules and must keep them open to inspection
No Oregon statute was found that makes a cemetery accept a marker bought elsewhere or that limits setting or inspection fees. ORS 97.710, read on a published copy of the Oregon Revised Statutes because the legislature’s own page could not be opened, lets a cemetery authority make rules “Regulating the uniformity, class and kind of all markers, monuments and other structures within its cemetery”. The same section says the rules must be “plainly printed or typewritten and maintained, subject to inspection, in the office of the cemetery authority”, so ask the office for the written marker rules before you order. The year the section was last amended was not confirmed.
Cemeteries are licensed by the Oregon Mortuary and Cemetery Board in Portland (971-673-1500). It takes written complaints about goods or services that differ from what was bought, and says it cannot investigate prices a buyer thinks are too high.
Portland: Metro’s pioneer cemeteries
Metro runs fourteen historic cemeteries, among them Lone Fir, Multnomah Park and Columbia Pioneer. Its Memorial Marker installation requirements (dated 3/2025) say “All flat Markers and vases must be flush with the ground, with no beveled edges”, “All Markers must have a 3″ border”, a concrete border “must be a minimum of 5″ thick”, and “The total footprint for a single flat Marker must not exceed 30″x18″x5″ (WxDxH) and 60″x18″x5″ (WxDxH) for a companion marker.” The diagram shows a 24 by 12 inch memorial inside that footprint.
On bronze the sheet is cautious: “The dimensions below are specific to granite Markers. All other natural stone or bronze metal Markers require additional approval.” So ask Metro (503-797-1709) for that approval before ordering bronze for a Metro grave. The authorization form (revised 3/2023) must be signed by the interment right owner and approved by Metro. Markers “must be either set by a vendor named on Metro’s Approved Memorial Marker Provider list or a vendor that is insured, licensed and bonded”, with 5 business days’ notice. The price list effective as of April 2026 prints a “VA marker installation fee $450 – $525” and no fee for a marker bought from an outside vendor.
Portland: River View and the Catholic cemeteries
River View Cemetery states that it “uses granite as the medium for outdoor memorialization” and that “any other medium such as bronze or marble is not accepted.” We do not offer a bronze grave marker for River View.
At Mt. Calvary in Portland and Gethsemani in Happy Valley, the Archdiocese of Portland’s Memorial Regulations (effective August 2010) list “FLAT MEMORIAL SIZES (Sawn sides only)”: “Single Memorials – 2′ 6″ x 1′ 6″ x 4″”, “Double Memorials – 4′ x 1′ 6″ x 4″” and “Baby Sections – 2′ 2″ x 1′ 4″ x 4″”, each with “a fixed sanded border of 2″ or 3″ wide”, and “Cement borders are prohibited” with narrow exceptions. The regulations are written for stone and never mention bronze for a grave, so ask the office whether bronze on granite is accepted before ordering. The rules provide for outside dealers: the installer “must stop at the office prior to installing any memorial” and give 48 hours’ notice, and the owner signs an Outside Marker Authorization. The Mt. Calvary price list effective July 15, 2026 shows no fee for an outside marker.
Lincoln Memorial Park, Skyline Memorial Gardens, Finley Sunset Hills and Rose City Cemetery: no marker rules or fees were found online, so ask the office.
Oregon City, Salem and Eugene
The City of Oregon City’s Mountain View Cemetery prints a sheet for outside vendors (effective February 2015, updated 11/1/2017). “All monuments or grave markers must be of granite or material approved by the Cemetery Manager”, so bronze needs the manager’s approval. Concrete borders are not allowed. Sizes are “Single Cremation Markers: Section M, N & Cascade Memorial Garden, 16″ x 8″ x 4″”, “Single Full Body Markers: 30″ x 18″ x 4″” and “Companion Full Body Markers: 48″ x 18″ x 4″”. A proof must be pre-approved. For a marker installed by an outside vendor the sheet charges “Perpetual Care Fund Fee $100.00” and “Location and Inspection Fee $85.00”; the city’s 2026 price list does not reprint these, so confirm the current amounts.
The Eugene Masonic Cemetery says permanent markers “must be made of natural stone or bronze”, must be approved before installation, and that flush markers “20” wide or smaller must be set in concrete.” Its price list (version 02/24.25) lists a grave marker review charge; ask the office for the amount and the size limit for your plot. In Salem, City View Cemetery and Belcrest Memorial Park publish no marker rules or fees online, so ask the office.
Oregon cemeteries at a glance
| Cemetery | What it accepts | Setting or foundation fee (year) |
|---|---|---|
| Metro pioneer cemeteries, Portland | Flush markers, single footprint to 30″x18″x5″; bronze needs additional approval | No outside marker fee printed (April 2026 price list) |
| River View, Portland | Granite only; bronze not accepted | Not published |
| Mt. Calvary and Gethsemani | Flat stone, single 2′ 6″ x 1′ 6″ x 4″; bronze not mentioned | Not on the July 15, 2026 price list |
| Mountain View, Oregon City | Granite or approved material, single 30″ x 18″ x 4″ | $100.00 plus $85.00 for outside vendors (2015 sheet, updated 2017) |
| Eugene Masonic Cemetery | Natural stone or bronze, approved before installation | Review charge listed; ask for the amount (2025 list) |
| Willamette National Cemetery | Government marker set by the cemetery | No cost for an eligible veteran |
Willamette and the other national cemeteries
The VA lists Willamette National Cemetery in Portland, Eagle Point National Cemetery, Fort Stevens National Cemetery at Hammond and the Roseburg National Cemetery Annex as open; the original Roseburg National Cemetery is closed. The VA’s list shows no state veterans cemetery in Oregon. In a national cemetery the cemetery officials order the government headstone or marker, and a private bronze marker is not the route. In a private cemetery that allows bronze, the family can order its own marker and request a VA medallion for it, with placement at private expense. See veteran bronze grave markers.
What we supply for an Oregon grave
Where an Oregon cemetery approves bronze, the usual envelope is a 24 by 12 inch plaque inside a 30 by 18 inch footprint, the single limit Metro prints and the single size at Oregon City. We cast 24 by 12 inches to order for $1,697.45, shipping included. A 16 by 8 inch plaque, the single cremation size at Oregon City, is $978.39, and a 20 by 10 inch plaque is $1,407.68. Companions are quoted.
We supply the bronze. Every plaque is cast in solid LG2 statuary bronze (85 percent copper, 5 percent tin, 5 percent zinc, 5 percent lead) with raised polished lettering on a textured background, a hand applied color and a clear protective coating. Cemetery markers are cast with lugs and fitted with 3/8 inch brass all thread studs, nuts and washers for bolting to a granite or concrete base; columbarium plates use 1/4 inch fittings. We publish the alloy openly and can supply a certificate of authenticity stating it, so a cemetery that has its own alloy rule can check our figures against it before you order; a few cemeteries specify a higher copper or lower lead content than LG2, and where a page knows of one it says so. The granite or concrete base and the setting are arranged through the cemetery office or a local monument dealer; we do not pour bases or install.
The price of the bronze from us, shipped anywhere in Oregon
To keep the two kinds of cost apart, this table shows only our price for the bronze, taken from the design tool on this site on 18 November 2026 for a standard rectangle with the default border and background. Prices are in US dollars and include shipping to Oregon.
| Size, inches | Typical use | Our price, shipping included |
|---|---|---|
| 6 x 4 in | Small niche or urn plate, pet memorial | $382.98 |
| 8 1/2 x 5 1/2 in | The VA niche marker size, private columbarium plates | $540.98 |
| 10 x 10 in | Niche plate or vase block size used by several cemeteries | $796.86 |
| 12 x 8 in | Small cremation marker, bench or wall plaque | $796.86 |
| 16 x 8 in | Infant and cremation markers (the minimum at many parks) | $978.39 |
| 18 x 10 in | Infant and cremation markers where 18 x 10 is the rule | $1,264.58 |
| 20 x 10 in | Cremation and urn garden markers, the 20 x 10 envelope | $1,407.68 |
| 20 x 12 in | Single flat marker inside a 20 x 12 envelope | $1,550.78 |
| 24 x 12 in | The standard single adult flat marker, cast to order at the 22 1/16 x 12 price | $1,697.45 |
Setting fees, permits, foundations and endowment care charges quoted on this page go to the cemetery, not to us, and sit on top of the plaque price. For any size not in the table, the design tool prices it the moment you type the width and height, and that price also includes shipping.
How to order
- Ask the cemetery office for its written marker rules: the size it allows for your space, the base it requires, who may set the marker and the fee. Most offices email the sheet the same day, and several states require the cemetery to keep it in print for you.
- Open the free design tool, pick the shape and type the width and height in inches. The price in US dollars updates as you go, shipping to any address in the continental United States included. That is the delivered price: we take care of any import duty and customs clearance ourselves, so there is nothing extra to pay when the plaque arrives.
- Add the names, dates and wording, choose a border and background, and add an emblem, motif or photo if you want one. Choose lugs with studs if the plaque will be bolted to a granite or concrete base, or a flat back for adhesive mounting on a wall or niche.
- Press Proceed to Purchase to order, or save the design and come back to it from My Account. We send a written proof you can forward to the cemetery for approval, and nothing is cast until you approve it. Need the full 24 by 12 inch marker size? Tell us when you order; it is cast to order at the same price as the 22 1/16 by 12 inch size in the tool.
Allow six to eight weeks from payment to delivery. Casting, hand finishing and shipping from our foundry take most of that time, and we send a free written proof before anything is cast. If your cemetery sets markers only in certain months, order early enough for its next installation window.
Frequently asked questions
Does Oregon law make a cemetery accept a marker I buy online?
No statute saying so was found. ORS 97.710 lets the cemetery regulate markers, but its rules must be printed and open to inspection at its office.
Can I put a bronze marker in River View Cemetery in Portland?
No. River View states that it uses granite for outdoor memorialization and that bronze or marble is not accepted.
Do Metro’s pioneer cemeteries allow bronze?
Only with additional approval. The 3/2025 requirements give sizes for granite, with a single flat footprint of at most 30″x18″x5″ and a 3″ border.
What does Oregon City charge for a marker set by an outside vendor?
Its sheet (effective February 2015, updated 11/1/2017) prints a $100.00 perpetual care fund fee and an $85.00 location and inspection fee. Confirm the current amounts.
Can a private bronze marker go in Willamette National Cemetery?
No. In VA national cemeteries the cemetery orders and sets a government marker.
Get the cemetery sheet, then design the bronze
Set the size your Oregon cemetery prints, add the names, dates and emblem, and see the US dollar price for solid cast bronze. Free proof for the office, shipping included.
Explore: bronze plaque sizes · bronze plaques in Washington State · contact us


