Rhode Island has no statute found that makes a cemetery accept a marker bought elsewhere, and the state’s statute site would not open for us, so the cemetery’s own rulebook is the rule. The largest operator, the Diocese of Providence, allows memorials “of granite or bronze” but also prints that ground flush markers may have “no raised lettering or design”, which a cast bronze plaque with raised letters does not meet. Swan Point in Providence publishes flat marker sizes but does not say whether bronze is accepted. Island Cemetery in Newport prints a 24 by 12 inch flush size and a $450 minimum foundation charge. Below is what each major operator prints, with the year of every fee. We cast the bronze plaque and show its price in US dollars with shipping included; the granite base and the setting are arranged through the cemetery office or a local monument dealer.

Design a Rhode Island bronze marker online
Enter the size your cemetery prints, add the inscription and symbol, and see the US dollar price with shipping included.
Explore: bronze grave markers · bronze plaques for headstones · bronze plaques across the USA
Rhode Island law: no outside marker statute found, and the statute site would not open
We found no Rhode Island statute that makes a cemetery accept a marker bought elsewhere or requires a cemetery to publish its rules, and no state cemetery regulator. The General Assembly’s statute site refused our connection, so we could not read Title 23, chapter 18 (Cemeteries) and do not quote it. A search excerpt of section 23-18-15 indicates a maximum charge of $75.00 for a cemetery to install the government plaque of a veteran it has accepted for burial; we could not confirm the wording or its conditions, so check the section before relying on it.
In practice the cemetery’s own rulebook decides, and the largest operator in the state has a rule that matters for cast bronze.
Diocese of Providence cemeteries: granite or bronze, but no raised lettering on flush markers
The Office of Catholic Cemeteries runs St. Ann in Cranston, Gate of Heaven in East Providence, Mount St. Mary and St. Francis in Pawtucket, Resurrection in Cumberland, St. Patrick in Providence and others. Its Rules and Regulations (revised April 2025) say “All memorials shall be made of granite or bronze with the grave/lot number inscribed thereon” and “All memorials must have a Catholic symbol.” They also say: “On ground flush grave markers there is to be no raised lettering or design.” Our plaques are cast with raised lettering, so we do not suggest one of our plaques as a ground flush marker in these cemeteries. If the office tells you in writing that a bronze with raised letters is accepted on your lot, send us that and we will work to it.
The same rules allow “Either one ground flush marker or one upright monument” per grave or lot, tell buyers to ask for the maximum size “at the time of grave/lot purchase”, and require “A detailed plan and design (Three Copies)” before a permit is signed. “All foundations will be installed exclusively by the cemetery personnel”, with a foundation fee “assessed at the time of the request”; no amounts are printed. The diocese’s FAQ adds that parish cemeteries have their own, separate rules.
Providence: Swan Point and the North Burial Ground
Swan Point Cemetery says “Flat Markers are flush with the ground and are most often made of granite. Single markers measure 20 to 36 inches long and 10 to 18 inches wide.” It describes itself as “conservative when it comes to monument styles”, and “the cemetery’s approval must be obtained prior to the erection of any structure.” Its service price schedule lists lots and interments but no marker, foundation or setting fee. It does not say whether bronze is accepted, so ask the office before ordering for a Swan Point grave.
The City of Providence’s North Burial Ground says “All of our burial lots allow for a variety of headstone styles, with some size restrictions.” Its published rules cover decorations only; materials, sizes and fees are not online. Ask the office at 5 Branch Avenue. We did not find published rules for the cemeteries of Warwick, Cranston, Pawtucket or East Providence; ask each office.
Newport: Island Cemetery
Island Cemetery’s rules (adopted March 2021) require that “Designs, locations and material for all monuments and markers, or other structures must be submitted to the Cemetery for approval” and that “All markers in the single or double grave sections must be flush with the grade.” Its service fees page prints “Marker Dimensions: Flush – 24″ L X 12″ W X 4″ D” and “FOUNDATION CHARGE : Minimum charge of $450 depending on size”, with no year printed. “Foundations will be constructed by the Cemetery”, on concrete “not less than four feet in depth.” The rules name no material, so ask whether a bronze plaque on a 4 inch granite base is approved.
Rhode Island cemeteries at a glance
| Cemetery | What it accepts | Setting or foundation fee (year) |
|---|---|---|
| Diocese of Providence cemeteries | Granite or bronze; no raised lettering on ground flush markers; Catholic symbol required | Foundation fee assessed, no amount printed (2025 rules) |
| Swan Point, Providence | Flat single markers 20 to 36 inches by 10 to 18 inches, most often granite; bronze not mentioned | None printed |
| North Burial Ground, Providence | Headstone styles with some size restrictions; material not stated | None printed |
| Island Cemetery, Newport | Flush marker 24″ L X 12″ W X 4″ D; material not stated | Foundation minimum $450 (no year printed) |
| Rhode Island Veterans Memorial Cemetery, Exeter | State veterans cemetery; ask the cemetery about its markers | Not on the pages we could read |
Rhode Island Veterans Memorial Cemetery and veterans
The VA lists no national cemetery in Rhode Island. The state run, VA grant funded Rhode Island Veterans Memorial Cemetery is at 301 S County Trl in Exeter; its own page would not open for us, so ask the cemetery what marker it provides. We do not suggest a private bronze marker there. In a private cemetery that allows bronze, the family can order its own marker and request a VA medallion for it, with placement at private expense. See veteran bronze grave markers.
What we supply for a Rhode Island grave
The one exact flush size printed in Rhode Island is Island Cemetery’s 24 by 12 inches, 4 inches deep. We cast a 24 by 12 inch plaque to order for $1,697.45, shipping included, for mounting on a granite base where the cemetery approves bronze. Swan Point’s range starts at 20 by 10 inches, which is $1,407.68. Companions are quoted. We do not suggest our raised letter plaques as ground flush markers in the Diocese of Providence cemeteries.
We supply the bronze. Every plaque is cast in solid LG2 statuary bronze (85 percent copper, 5 percent tin, 5 percent zinc, 5 percent lead) with raised polished lettering on a textured background, a hand applied color and a clear protective coating. Cemetery markers are cast with lugs and fitted with 3/8 inch brass all thread studs, nuts and washers for bolting to a granite or concrete base; columbarium plates use 1/4 inch fittings. We publish the alloy openly and can supply a certificate of authenticity stating it, so a cemetery that has its own alloy rule can check our figures against it before you order; a few cemeteries specify a higher copper or lower lead content than LG2, and where a page knows of one it says so. The granite or concrete base and the setting are arranged through the cemetery office or a local monument dealer; we do not pour bases or install.
The price of the bronze from us, shipped anywhere in Rhode Island
To keep the two kinds of cost apart, this table shows only our price for the bronze, taken from the design tool on this site on 18 November 2026 for a standard rectangle with the default border and background. Prices are in US dollars and include shipping to Rhode Island.
| Size, inches | Typical use | Our price, shipping included |
|---|---|---|
| 6 x 4 in | Small niche or urn plate, pet memorial | $382.98 |
| 8 1/2 x 5 1/2 in | The VA niche marker size, private columbarium plates | $540.98 |
| 10 x 10 in | Niche plate or vase block size used by several cemeteries | $796.86 |
| 12 x 8 in | Small cremation marker, bench or wall plaque | $796.86 |
| 16 x 8 in | Infant and cremation markers (the minimum at many parks) | $978.39 |
| 18 x 10 in | Infant and cremation markers where 18 x 10 is the rule | $1,264.58 |
| 20 x 10 in | Cremation and urn garden markers, the 20 x 10 envelope | $1,407.68 |
| 20 x 12 in | Single flat marker inside a 20 x 12 envelope | $1,550.78 |
| 24 x 12 in | The standard single adult flat marker, cast to order at the 22 1/16 x 12 price | $1,697.45 |
Setting fees, permits, foundations and endowment care charges quoted on this page go to the cemetery, not to us, and sit on top of the plaque price. For any size not in the table, the design tool prices it the moment you type the width and height, and that price also includes shipping.
How to order
- Ask the cemetery office for its written marker rules: the size it allows for your space, the base it requires, who may set the marker and the fee. Most offices email the sheet the same day, and several states require the cemetery to keep it in print for you.
- Open the free design tool, pick the shape and type the width and height in inches. The price in US dollars updates as you go, shipping to any address in the continental United States included. That is the delivered price: we take care of any import duty and customs clearance ourselves, so there is nothing extra to pay when the plaque arrives.
- Add the names, dates and wording, choose a border and background, and add an emblem, motif or photo if you want one. Choose lugs with studs if the plaque will be bolted to a granite or concrete base, or a flat back for adhesive mounting on a wall or niche.
- Press Proceed to Purchase to order, or save the design and come back to it from My Account. We send a written proof you can forward to the cemetery for approval, and nothing is cast until you approve it. Need the full 24 by 12 inch marker size? Tell us when you order; it is cast to order at the same price as the 22 1/16 by 12 inch size in the tool.
Allow six to eight weeks from payment to delivery. Casting, hand finishing and shipping from our foundry take most of that time, and we send a free written proof before anything is cast. If your cemetery sets markers only in certain months, order early enough for its next installation window.
Frequently asked questions
Does Rhode Island law make a cemetery accept a marker I buy online?
No statute saying so was found, though the state’s statute site would not open for us. Each cemetery sets its own rules.
Can I use a cast bronze marker at St. Ann in Cranston or another Diocese of Providence cemetery?
The rules revised April 2025 allow granite or bronze but say ground flush markers may have no raised lettering or design, so we do not suggest our raised letter plaques there unless the office approves one in writing.
What size flat marker does Swan Point allow?
Its site says single flat markers measure 20 to 36 inches long and 10 to 18 inches wide and are most often granite. It does not say whether bronze is accepted, so ask the office.
What does Island Cemetery in Newport charge for a foundation?
A minimum of $450 depending on size, with no year printed. The cemetery builds all foundations and prints a flush marker size of 24 by 12 by 4 inches.
Is there a VA national cemetery in Rhode Island?
No. The VA lists the state run Rhode Island Veterans Memorial Cemetery in Exeter.
Get the cemetery sheet, then design the bronze
Set the size your Rhode Island cemetery prints, add the names, dates and emblem, and see the US dollar price for solid cast bronze. Free proof for the office, shipping included.
Design a Rhode Island Marker →
Explore: bronze plaque sizes · bronze plaques in Massachusetts · contact us


