Delaware has no statute found that makes a cemetery accept a marker bought elsewhere or that caps a setting fee; the state Cemetery Board registers cemeteries and passes complaints on, so the cemetery’s own rulebook decides. The Catholic Diocese of Wilmington prints the only full bronze standard found in the state, for its Wilmington and Dagsboro cemeteries: bronze up to 24 inches by 14 inches on a granite base with a 2 inch border, and a foundation charge of $.80 per square inch. Wilmington and Brandywine Cemetery lets families use any monument company and charges $1.00 per square inch for a foundation. Below is what each operator prints, with the year of a fee where one is printed. We cast the bronze plaque and show its price in US dollars with shipping included; the granite base and the setting are arranged through the cemetery office or a local monument dealer.

Design a Delaware bronze marker online
Enter the size your cemetery prints, add the inscription and symbol, and see the US dollar price with shipping included.
Explore: bronze grave markers · bronze plaques for headstones · bronze plaques across the USA
Delaware law: a Cemetery Board that registers and refers, not a marker statute
Title 29, Chapter 79A of the Delaware Code sets up the Delaware Cemetery Board. Under section 7904A the Board may “Receive and forward to appropriate agencies of the State, or other organizations, complaints from any person relating to a Delaware cemetery”. No section was found that makes a cemetery accept a marker bought elsewhere, caps a setting or foundation fee, or requires a cemetery to publish its memorial rules.
Title 9, Chapter 10 lets each county set maintenance rules for for-profit cemeteries, including “Refilling or resetting settled graves or markers annually or within 120 days” of the operator learning of the problem. It says nothing about who may supply a marker.
Wilmington and Dagsboro: the Catholic Diocese of Wilmington cemeteries
Catholic Cemeteries, Inc. publishes one Rules and Regulations for Memorials (dated 8/3/2015) for Cathedral Cemetery and All Saints Cemetery in Wilmington and Gate of Heaven Cemetery in Dagsboro, near the beach towns. It is the only full bronze standard found in Delaware. “Maximum size of the bronze memorial on an individual memorial is 24″ long by 14″ wide”, and for two or more graves “44” long by 14″ wide”. “Bronze memorial shall be attached to a precast granite base. Bases will have a minimum thickness of 4″ and a 2″ border”, set so the top “is even with the ground’s surface”. Infant sections take lawn level memorials up to “18”long by 10″ wide” and cremated remains sections a standard “12” long by 12″ wide”.
The Application to Install Memorial prints “Application Fee : $60.00” and “Foundation Charge: $.80 per square inch”, with no year printed. The rules build the foundation “as large as the bottom base”, so a 24 by 14 inch bronze on a 28 by 18 inch base comes to about $403.20 for the foundation plus the $60.00 application, assuming the charge is measured on the full base.
Three conditions need checking before you order. “All memorials shall have a Christian symbol in a prominent position”, and ceramic photographs and emblems of secular organizations are not permitted. “Casting on bronze memorials shall have a minimum thickness of 3/16″” and “Bronze memorials must be of an approved alloy in proportion generally recommended by the bronze industry”; the rules print no percentages, so send our alloy statement and thickness figure to the office and get its answer before ordering. And the application carries a certification signed by “A LICENSED MEMORIAL DEALER” with liability and workers’ compensation cover, who arranges the setting under cemetery supervision. We cast and ship the bronze and do not install, so ask the office first who would sign and set a plaque ordered from us; if it requires its own or a dealer’s marker, we are not the supplier for that grave.
Timing is printed too: foundations “WILL NOT BE CONSTRUCTED FROM MAY 15TH TO MAY 30TH OR FROM DECEMBER 15TH TO DECEMBER 31ST, AND THE TWO (2) WEEKS PRECEDING EASTER”, and no memorial is set on Saturdays, Sundays, Holy Days or holidays.
Wilmington: Wilmington and Brandywine, Lower Brandywine and the memorial parks
Wilmington and Brandywine Cemetery says “You may choose any monument company you would like. They must reach out to the cemetery and provide an application as well as a drawing with dimensions of the stone.” Sizes depend on the section and come from the office. Its pricing page prints “Foundation Fee: $1.00 per square inch”, no year printed. The pages speak of stones and never mention bronze, so ask before ordering.
Lower Brandywine Presbyterian Church Cemetery (regulations undated) requires the manager’s approval of every marker and foundation, says size requirements differ by area, and prints “All foundations must be 24 inches in depth and match the base size of the monument or marker.” No fee or material list is printed.
Gracelawn Memorial Park in New Castle prints nothing about marker sizes, rules or fees, and nothing official was found online for Silverbrook or Riverview in Wilmington; ask the office.
Dover and the beach towns: little in print
Outside the diocese’s Gate of Heaven in Dagsboro, no official marker rules, sizes or setting fees were found online for cemeteries in Dover, Milford, Lewes, Rehoboth Beach, Milton, Georgetown or Millsboro. Ask the cemetery office for its written marker sheet.
Delaware cemeteries at a glance
| Cemetery | What it accepts | Setting or foundation fee (year) |
|---|---|---|
| Cathedral and All Saints, Wilmington | Bronze up to 24″ long by 14″ wide on a granite base with a 2″ border; Christian symbol required | $60.00 application plus $.80 per square inch foundation (no year printed) |
| Gate of Heaven, Dagsboro | Same diocesan rules (dated 8/3/2015) | Same diocesan form (no year printed) |
| Wilmington and Brandywine, Wilmington | Any monument company; sizes by section; bronze not mentioned | $1.00 per square inch foundation (no year printed) |
| Lower Brandywine, Wilmington | Manager approval; foundation 24 inches deep matching the base | Not published |
| Gracelawn Memorial Park, New Castle | Nothing printed online | Not published |
| Delaware Veterans Memorial Cemetery, Bear and Millsboro | Government marker ordered by the cemetery | No charge for the marker; any state setting fee not published |
Delaware Veterans Memorial Cemetery and veterans
The VA’s Delaware list says “This state does not have any VA national cemeteries.” The state runs the Delaware Veterans Memorial Cemetery at Bear and at Millsboro. In a state veterans cemetery the cemetery officials order the government headstone or marker, so a private bronze marker is not the route there. In a private cemetery that allows bronze, the family can order its own marker and request a VA medallion for it, with placement at private expense. See veteran bronze grave markers.
What we supply for a Delaware grave
The only Delaware bronze envelope in print is the Diocese of Wilmington’s maximum of 24 by 14 inches for one grave, which we cast for $1,840.54, shipping included. The common 24 by 12 inch size is $1,697.45, cast to order. The diocese’s 12 by 12 inch cremation size is $978.39 and an 18 by 10 inch infant size is $1,264.58. Companions are quoted.
We supply the bronze. Every plaque is cast in solid LG2 statuary bronze (85 percent copper, 5 percent tin, 5 percent zinc, 5 percent lead) with raised polished lettering on a textured background, a hand applied color and a clear protective coating. Cemetery markers are cast with lugs and fitted with 3/8 inch brass all thread studs, nuts and washers for bolting to a granite or concrete base; columbarium plates use 1/4 inch fittings. We publish the alloy openly and can supply a certificate of authenticity stating it, so a cemetery that has its own alloy rule can check our figures against it before you order; a few cemeteries specify a higher copper or lower lead content than LG2, and where a page knows of one it says so. The granite or concrete base and the setting are arranged through the cemetery office or a local monument dealer; we do not pour bases or install.
The price of the bronze from us, shipped anywhere in Delaware
To keep the two kinds of cost apart, this table shows only our price for the bronze, taken from the design tool on this site on 18 November 2026 for a standard rectangle with the default border and background. Prices are in US dollars and include shipping to Delaware.
| Size, inches | Typical use | Our price, shipping included |
|---|---|---|
| 6 x 4 in | Small niche or urn plate, pet memorial | $382.98 |
| 8 1/2 x 5 1/2 in | The VA niche marker size, private columbarium plates | $540.98 |
| 10 x 10 in | Niche plate or vase block size used by several cemeteries | $796.86 |
| 12 x 8 in | Small cremation marker, bench or wall plaque | $796.86 |
| 16 x 8 in | Infant and cremation markers (the minimum at many parks) | $978.39 |
| 18 x 10 in | Infant and cremation markers where 18 x 10 is the rule | $1,264.58 |
| 20 x 10 in | Cremation and urn garden markers, the 20 x 10 envelope | $1,407.68 |
| 20 x 12 in | Single flat marker inside a 20 x 12 envelope | $1,550.78 |
| 24 x 12 in | The standard single adult flat marker, cast to order at the 22 1/16 x 12 price | $1,697.45 |
Setting fees, permits, foundations and endowment care charges quoted on this page go to the cemetery, not to us, and sit on top of the plaque price. For any size not in the table, the design tool prices it the moment you type the width and height, and that price also includes shipping.
How to order
- Ask the cemetery office for its written marker rules: the size it allows for your space, the base it requires, who may set the marker and the fee. Most offices email the sheet the same day, and several states require the cemetery to keep it in print for you.
- Open the free design tool, pick the shape and type the width and height in inches. The price in US dollars updates as you go, shipping to any address in the continental United States included. That is the delivered price: we take care of any import duty and customs clearance ourselves, so there is nothing extra to pay when the plaque arrives.
- Add the names, dates and wording, choose a border and background, and add an emblem, motif or photo if you want one. Choose lugs with studs if the plaque will be bolted to a granite or concrete base, or a flat back for adhesive mounting on a wall or niche.
- Press Proceed to Purchase to order, or save the design and come back to it from My Account. We send a written proof you can forward to the cemetery for approval, and nothing is cast until you approve it. Need the full 24 by 12 inch marker size? Tell us when you order; it is cast to order at the same price as the 22 1/16 by 12 inch size in the tool.
Allow six to eight weeks from payment to delivery. Casting, hand finishing and shipping from our foundry take most of that time, and we send a free written proof before anything is cast. If your cemetery sets markers only in certain months, order early enough for its next installation window.
Frequently asked questions
Does Delaware law make a cemetery accept a marker I buy online?
No statute saying so was found. The Delaware Cemetery Board registers cemeteries and forwards complaints; the cemetery’s own rules decide.
What size bronze marker do the Catholic cemeteries in Wilmington allow?
Up to 24 inches long by 14 inches wide for one grave and 44 inches by 14 inches for two or more, on a granite base at least 4 inches thick with a 2 inch border, under rules dated 8/3/2015.
What does the Diocese of Wilmington charge for a marker foundation?
Its application form prints a $60.00 application fee and a foundation charge of $.80 per square inch, with no year printed.
Can I use any monument company at Wilmington and Brandywine Cemetery?
Yes, its website says you may choose any monument company; the company files an application and a dimensioned drawing. The foundation fee is $1.00 per square inch, no year printed.
Is there a national cemetery in Delaware?
No. The VA lists none. The state runs the Delaware Veterans Memorial Cemetery at Bear and Millsboro, where the cemetery orders a government marker.
Get the cemetery sheet, then design the bronze
Set the size your Delaware cemetery prints, add the names, dates and emblem, and see the US dollar price for solid cast bronze. Free proof for the office, shipping included.
Explore: bronze plaque sizes · bronze plaques in Pennsylvania · contact us


