Indiana law is on the buyer’s side: a cemetery owner “shall not prevent the use of or installation in the cemetery of any commodity purchased from any source” if it meets the cemetery’s rules, and the installation fee must “be the same to all regardless of who furnishes the commodities”. The same code gives the cemetery “the exclusive right” to set the marker and install its base, so expect the cemetery to do the setting. The large Indianapolis and Fort Wayne cemeteries publish no marker sizes or fees online, so the office is the source there. The City of Evansville prints its full rulebook for Oak Hill and Locust Hill. Below is what each one prints. We cast the bronze plaque and show its price in US dollars with shipping included; the granite base and the setting are arranged through the cemetery office or a local monument dealer.

Cast bronze grave marker on a granite base in a lawn cemetery, the kind of marker we ship to Indiana

Design an Indiana bronze marker online

Enter the size your cemetery prints, add the inscription and symbol, and see the US dollar price with shipping included.

Design My Marker →

Explore: bronze grave markers · bronze plaques for headstones · bronze plaques across the USA

Indiana law: any source, the same fee for all, and the cemetery sets it

Indiana Code 23-14-47-2 (added 1997) says “A cemetery owner shall not prevent the use of or installation in the cemetery of any commodity purchased from any source if the commodity meets the rules and regulations” the cemetery has adopted on type, material, design, composition and finish. Section 23-14-47-3 (last amended 2022) says the fee for installation services must “be the same to all regardless of who furnishes the commodities”, and section 23-14-47-4 makes the cemetery keep a printed schedule of those charges “subject to inspection and copying”.

The counterweight is Indiana Code 23-14-46-7 (last amended 2022): the cemetery owner “has the exclusive right to” set or install a marker and to “install any kind of foundation or other type of base” for it, itself or through its authorized representative. So you may buy the bronze from us, but do not plan on your own installer unless the cemetery agrees. Under section 23-14-46-3 the rules must be “plainly printed or typewritten” and “kept available for inspection and copying”, so ask the office for them. Questions about cemetery regulation go to the State Board of Funeral and Cemetery Service at the Indiana Professional Licensing Agency.

Indianapolis and Fort Wayne: nothing published online, so ask the office

The Catholic Cemeteries Association (Calvary, Our Lady of Peace, Holy Cross and St. Joseph) says only that there are options “From flat grave markers to upright monuments and statuary” and that “Monuments conform to the regulations that govern different areas of the cemetery”; no sizes, materials or fees are printed. Flanner Buchanan, which runs the Washington Park cemeteries, sells markers through its own monument company and publishes no rules or fees. We found no published marker rules for Crown Hill.

In Fort Wayne, Greenlawn Memorial Park describes “multiple bronze flush marker sections” and Lindenwood Cemetery describes “multiple monument and flush marker sections”. Neither prints a size, a base requirement or a fee. For all of these, ask the office for the printed rules and the printed schedule of installation charges, which Indiana law requires it to keep.

Evansville: Oak Hill and Locust Hill

The City of Evansville publishes Article VII, Markers and Monuments (no date printed) for both city cemeteries. Materials are “good quality granite, marble or comparable materials of good quality approved by the Board”; bronze is not named, so confirm approval with the Superintendent before ordering. The Board recommends “Single Burial Space: 30″ X 12″ X 18″ in height. Foundation to be 18″ deep.” and “Babyland: 16″ X 8″ X 12″ in height. Foundation to be 18″ deep.”; foot stones “are not to exceed 24″ in length, 12″ wide” and must be flush. Here the foundation is “to be constructed by a Monument dealer with insurance on file with the Cemetery office”, and foundation orders are filed “at least thirty (30) days prior to the time the marker or monument is to be delivered.” The price sheet updated 9/18/2019 prints “Pinning Fee per sq. inch $0.30” without saying what it covers, and notes that a VA stone outside the veteran section may be “either Granite or Bronze.”

Smaller towns that print rules

The Town of Bremen (no date printed) defines a marker as any grave identification “OF BRONZE, GRANITE, MARBLE, STONE AND THE LIKE”, set flush with the ground, one per grave, on a concrete foundation. The Town of Winamac schedule effective 7/19/2024 prints “Foundations per space $600.00”; a later schedule may differ, so confirm the current figure.

Indiana cemeteries at a glance

CemeteryWhat it acceptsSetting or foundation fee (year)
Oak Hill and Locust Hill, EvansvilleGranite, marble or Board approved materials; single 30″ X 12″, foot stones to 24″ by 12″Pinning fee $0.30 per sq. inch (2019 sheet)
Catholic Cemeteries Association, IndianapolisFlat markers to upright monuments, by sectionNot published; ask the office
Greenlawn Memorial Park, Fort WayneBronze flush marker sectionsNot published; ask the office
Lindenwood Cemetery, Fort WayneMonument and flush marker sectionsNot published; ask the office
Town of BremenBronze, granite, marble or stone, flushNot printed (no date)
Town of WinamacNot stated on the schedule$600.00 foundation per space (effective 7/19/2024)
Marion National CemeteryGovernment marker set by the cemeteryNo cost for an eligible veteran

Marion, New Albany and Crown Hill national cemeteries and veterans

Indiana has three VA national cemeteries: Marion, New Albany and Crown Hill National Cemetery in Indianapolis, which is closed to new interments. The state runs the Indiana Veterans Memorial Cemetery at Madison. Government headstones and markers are used there, and a private bronze marker is not the route. In a private cemetery that allows bronze, the family can order its own marker and request a VA medallion for it, with placement at private expense. See veteran bronze grave markers.

What we supply for an Indiana grave

No Indiana cemetery we read prints a bronze on granite size, so take the size from the office. Where a 24 by 12 inch flush marker is allowed, as for foot stones at Evansville’s city cemeteries, we cast that size to order for $1,697.45, shipping included. A 16 by 8 inch plaque, the Babyland footprint at Evansville, is $978.39, and a 20 by 10 inch plaque is $1,407.68. Companions are quoted.

We supply the bronze. Every plaque is cast in solid LG2 statuary bronze (85 percent copper, 5 percent tin, 5 percent zinc, 5 percent lead) with raised polished lettering on a textured background, a hand applied color and a clear protective coating. Cemetery markers are cast with lugs and fitted with 3/8 inch brass all thread studs, nuts and washers for bolting to a granite or concrete base; columbarium plates use 1/4 inch fittings. We publish the alloy openly and can supply a certificate of authenticity stating it, so a cemetery that has its own alloy rule can check our figures against it before you order; a few cemeteries specify a higher copper or lower lead content than LG2, and where a page knows of one it says so. The granite or concrete base and the setting are arranged through the cemetery office or a local monument dealer; we do not pour bases or install.

The price of the bronze from us, shipped anywhere in Indiana

To keep the two kinds of cost apart, this table shows only our price for the bronze, taken from the design tool on this site on 18 November 2026 for a standard rectangle with the default border and background. Prices are in US dollars and include shipping to Indiana.

Size, inchesTypical useOur price, shipping included
6 x 4 inSmall niche or urn plate, pet memorial$382.98
8 1/2 x 5 1/2 inThe VA niche marker size, private columbarium plates$540.98
10 x 10 inNiche plate or vase block size used by several cemeteries$796.86
12 x 8 inSmall cremation marker, bench or wall plaque$796.86
16 x 8 inInfant and cremation markers (the minimum at many parks)$978.39
18 x 10 inInfant and cremation markers where 18 x 10 is the rule$1,264.58
20 x 10 inCremation and urn garden markers, the 20 x 10 envelope$1,407.68
20 x 12 inSingle flat marker inside a 20 x 12 envelope$1,550.78
24 x 12 inThe standard single adult flat marker, cast to order at the 22 1/16 x 12 price$1,697.45

Setting fees, permits, foundations and endowment care charges quoted on this page go to the cemetery, not to us, and sit on top of the plaque price. For any size not in the table, the design tool prices it the moment you type the width and height, and that price also includes shipping.

How to order

  1. Ask the cemetery office for its written marker rules: the size it allows for your space, the base it requires, who may set the marker and the fee. Most offices email the sheet the same day, and several states require the cemetery to keep it in print for you.
  2. Open the free design tool, pick the shape and type the width and height in inches. The price in US dollars updates as you go, shipping to any address in the continental United States included. That is the delivered price: we take care of any import duty and customs clearance ourselves, so there is nothing extra to pay when the plaque arrives.
  3. Add the names, dates and wording, choose a border and background, and add an emblem, motif or photo if you want one. Choose lugs with studs if the plaque will be bolted to a granite or concrete base, or a flat back for adhesive mounting on a wall or niche.
  4. Press Proceed to Purchase to order, or save the design and come back to it from My Account. We send a written proof you can forward to the cemetery for approval, and nothing is cast until you approve it. Need the full 24 by 12 inch marker size? Tell us when you order; it is cast to order at the same price as the 22 1/16 by 12 inch size in the tool.

Allow six to eight weeks from payment to delivery. Casting, hand finishing and shipping from our foundry take most of that time, and we send a free written proof before anything is cast. If your cemetery sets markers only in certain months, order early enough for its next installation window.

Frequently asked questions

Does Indiana law make a cemetery accept a marker I buy online?

Indiana Code 23-14-47-2 says a cemetery owner shall not prevent the use or installation of a commodity purchased from any source if it meets the cemetery’s rules.

Can my own installer set the marker in Indiana?

Not as of right. Indiana Code 23-14-46-7 gives the cemetery owner the exclusive right to set markers and install foundations, though some cemeteries, such as Evansville’s, have dealers build the foundation.

Can the cemetery charge me more because I bought elsewhere?

No. Under Indiana Code 23-14-47-3 the installation fee must be the same to all regardless of who furnishes the marker.

What sizes do Crown Hill, Calvary or Lindenwood allow?

They publish no sizes or fees online. Ask the office for its printed rules and schedule of charges, which Indiana law requires it to keep for inspection and copying.

Can a private bronze marker go in Marion National Cemetery?

No. In VA national cemeteries the cemetery orders and sets a government marker.

Get the cemetery sheet, then design the bronze

Set the size your Indiana cemetery prints, add the names, dates and emblem, and see the US dollar price for solid cast bronze. Free proof for the office, shipping included.

Design an Indiana Marker →

Explore: bronze plaque sizes · bronze plaques in Ohio · contact us